Fakta om udbudet
EU-nr
2015/S 124-228039
Offentliggjort
Udbyder
Services related to air pollution
Contract award notice
Services
Directive 2004/18/EC
Section I: Contracting authority
I.1) Name, addresses and contact point(s)
Danish Defence Acquisition and Logistics Organization
Lautrupbjerg 1-5
For the attention of: Mikkel Hanskov
2750 Ballerup
DENMARK
Telephone: +45 72307807
E-mail: mcha@kammeradvokaten.dk
Internet address(es):
General address of the contracting authority: http://forsvaret.dk/fmt
I.2) Type of the contracting authority
Ministry or any other national or federal authority, including their regional or local sub-divisions
I.3) Main activity
Defence
I.4) Contract award on behalf of other contracting authorities
The contracting authority is purchasing on behalf of other contracting authorities: no
Section II: Object of the contract
II.1) Description
II.1.1) Title attributed to the contract
Framework agreement for support, maintenance, modification and configuration of the Digital Airless Multipoint SCR systems (Selective Catalytic Reduction).
II.1.2) Type of contract and location of works, place of delivery or of performance
Services
Service category No 1: Maintenance and repair services
NUTS code
Service category No 1: Maintenance and repair services
NUTS code
II.1.3) Information about a framework agreement or a dynamic purchasing system (DPS)
The notice involves the establishment of a framework agreement
II.1.4) Short description of the contract or purchase(s)
DALO has procured a framework agreement for support, maintenance, modification and configuration of the
Digital Airless Multipoint SCR systems (Selective Catalytic Reduction), which is installed in six patrol vessels of
the DIANA-class.
The DIANA-class patrol vessels patrols in the area around the Danish borders and conduct among others
surveillance, search and rescue operations (SAR) and oil pollutions operations.
In order to meet future air pollutant requirements the vessels has been equipped with a SCR system for
reduction of the NOx pollution from the main engines. The system is developed by Dansk Teknologi. The
company has patented the Digital Airless Mulitpoint injection system.
The scope of the system is to inject Urea into the exhaust gas, which is converted to ammonia (NH3). In the
catalyst the NOx is reduced with the ammonia and the output will be harmless nitrogen (N2).
Roughly, the system consists of the following parts:
— SCR catalyst divided in four elements,
— Urea tank,
— Digital dosing pump,
— Valve and pressure sensor panel with pulsation damper,
— Sootblowing system,
— Urea injection section equipped with airless Urea injection nozzles, temperature sensor and NOx sensor,
— Temperature and NOx sensor in the exhaust outlet,
— SCR control unit.
The NOx reduction performed by the system is 90-98 percent.
The SCR system is installed as an addition to the existing MTU exhaust system but if the system has
malfunction it can be switched off without any further precautions save for regularly sootblowing to protect the
catalyst.
The service must be conducted by certified personnel who have the required education and expertise to
conduct the service and maintenance in accordance to the manufacture's requirements, including updating and
maintenance of the software for the system.
It is furthermore required that the bidder have access/agreements needed for conducting service on parts,
processes and software in the system, which are protected by patented parts and processes. The system has
the following patents:
PCT/DK2008/050286: Nozzle arrangement
PCT/DK2008/050045: A system and method for dosing fluid.
PCT/DK2007/050077: Pump for feeding urea to an engine exhaust system
PCT/DK2007/050170: Nozzle and method for atomization of fluid
PCT/DK2007/050143: Nozzle temperature control
PCT/DK2006/050084: Fluid transfer system and method
PCT/DK2006/050074: Nozzle with impinging jets.
PCT/DK2006/000272: Atomization of fluids by mutual impingment of fluid streams.
PCT/IB2001/001880: Metering pump with with an electric motor.
PA/2009/70217: System for Selective Catalyst Reduction (pending patent)
With regards to the contract notice DALO recieved one application for participation, and therefore recieved
one tender for the framework contract. This tender did not correspond to the minimum requirements in the
tender material, and consequently DALO did not recieve any conditionally tenders. On this basis this contract is
awarded in accordance with article 30, 1, litra a in directive 2004/18/EC. The original terms of the contract are
not substainaly altered.
Digital Airless Multipoint SCR systems (Selective Catalytic Reduction), which is installed in six patrol vessels of
the DIANA-class.
The DIANA-class patrol vessels patrols in the area around the Danish borders and conduct among others
surveillance, search and rescue operations (SAR) and oil pollutions operations.
In order to meet future air pollutant requirements the vessels has been equipped with a SCR system for
reduction of the NOx pollution from the main engines. The system is developed by Dansk Teknologi. The
company has patented the Digital Airless Mulitpoint injection system.
The scope of the system is to inject Urea into the exhaust gas, which is converted to ammonia (NH3). In the
catalyst the NOx is reduced with the ammonia and the output will be harmless nitrogen (N2).
Roughly, the system consists of the following parts:
— SCR catalyst divided in four elements,
— Urea tank,
— Digital dosing pump,
— Valve and pressure sensor panel with pulsation damper,
— Sootblowing system,
— Urea injection section equipped with airless Urea injection nozzles, temperature sensor and NOx sensor,
— Temperature and NOx sensor in the exhaust outlet,
— SCR control unit.
The NOx reduction performed by the system is 90-98 percent.
The SCR system is installed as an addition to the existing MTU exhaust system but if the system has
malfunction it can be switched off without any further precautions save for regularly sootblowing to protect the
catalyst.
The service must be conducted by certified personnel who have the required education and expertise to
conduct the service and maintenance in accordance to the manufacture's requirements, including updating and
maintenance of the software for the system.
It is furthermore required that the bidder have access/agreements needed for conducting service on parts,
processes and software in the system, which are protected by patented parts and processes. The system has
the following patents:
PCT/DK2008/050286: Nozzle arrangement
PCT/DK2008/050045: A system and method for dosing fluid.
PCT/DK2007/050077: Pump for feeding urea to an engine exhaust system
PCT/DK2007/050170: Nozzle and method for atomization of fluid
PCT/DK2007/050143: Nozzle temperature control
PCT/DK2006/050084: Fluid transfer system and method
PCT/DK2006/050074: Nozzle with impinging jets.
PCT/DK2006/000272: Atomization of fluids by mutual impingment of fluid streams.
PCT/IB2001/001880: Metering pump with with an electric motor.
PA/2009/70217: System for Selective Catalyst Reduction (pending patent)
With regards to the contract notice DALO recieved one application for participation, and therefore recieved
one tender for the framework contract. This tender did not correspond to the minimum requirements in the
tender material, and consequently DALO did not recieve any conditionally tenders. On this basis this contract is
awarded in accordance with article 30, 1, litra a in directive 2004/18/EC. The original terms of the contract are
not substainaly altered.
II.1.5) Common procurement vocabulary (CPV)
90731000
II.1.6) Information about Government Procurement Agreement (GPA)
II.2) Total final value of contract(s)
II.2.1) Total final value of contract(s)
Section IV: Procedure
IV.1) Type of procedure
IV.1.1) Type of procedure
Negotiated with a call for competition
IV.2) Award criteria
IV.2.1) Award criteria
IV.2.2) Information about electronic auction
IV.3) Administrative information
IV.3.1) File reference number attributed by the contracting authority
IV.3.2) Previous publication(s) concerning the same contract
Contract notice
Notice number in the OJEU: 2014/S 132-236682 of 12.7.2014
Voluntary ex ante transparency notice
Notice number in the OJEU: 2015/S 63-111516 of 26.3.2015
Section V: Award of contract
Contract No: 1Lot title: Framework agreement for support, maintenance, modification and configuration of the Digital Airless Multipoint SCR systems (Selective Catalytic Reduction) V.1) Date of contract award decision:
10.4.2015
V.2) Information about offers
Number of offers received: 1
V.3) Name and address of economic operator in favour of whom the contract award decision has been taken
Dansk Teknologi A/S
Østre Teglværksvej 24
3450 Allerød
DENMARK
Telephone: +45 48135000
V.4) Information on value of contract
Initial estimated total value of the contract:
Value: 3 000 000 EUR
Excluding VAT
Total final value of the contract:
Value: 3 000 000 DKK
Excluding VAT
Value: 3 000 000 EUR
Excluding VAT
Total final value of the contract:
Value: 3 000 000 DKK
Excluding VAT
V.5) Information about subcontracting
The contract is likely to be sub-contracted: no
Section VI: Complementary information
VI.1) Information about European Union funds
The contract is related to a project and/or programme financed by European Union funds: no
VI.2) Additional information:
VI.3) Procedures for appeal
VI.3.1) Body responsible for appeal procedures
The Danish Complaints Board, The Danish Business Authority
Dahlerup Pakhus, Langelinie Allé 17
2100 København Ø
DENMARK
E-mail: klfu@klfu.dk
Telephone: +45 35291000
Internet address: http://klfu.dk
Body responsible for mediation procedures
There are no institution responsible for mediation procedures in Denmark
VI.3.2) Lodging of appeals
Precise information on deadline(s) for lodging appeals: Complaints must be filed with The Complaints Board for Public Procurement within 45 calendar days after the contracting authority has published a contract award notice in the Official Journal of the European Union (with effect from the day following the publication date).
However, if the tender concerns a framework agreement complaints must be filed with The Complaints Board for Public Procurement within 6 months after the Contracting Authority has sent notification to the candidates/tenderers involved that the Contracting Authority has entered into the framework agreement if the notification DA Standardformular 15 — Bekendtgørelse med henblik på frivillig forudgående gennemsigtighed 8 / 17 included a short account of the relevant reasons for the decision.
The complainant must inform the contracting authority of the appeal in writing at the latest simultaneously with the lodge of the complaint to The Complaints Board for Public Procurement. The complainant shall state whether the complaint has been lodged in the stand-still period. If the appeal has not been lodged in the standstill period, the appellant must also state whether it is requested that the appeal is granted delaying effect.
However, if the tender concerns a framework agreement complaints must be filed with The Complaints Board for Public Procurement within 6 months after the Contracting Authority has sent notification to the candidates/tenderers involved that the Contracting Authority has entered into the framework agreement if the notification DA Standardformular 15 — Bekendtgørelse med henblik på frivillig forudgående gennemsigtighed 8 / 17 included a short account of the relevant reasons for the decision.
The complainant must inform the contracting authority of the appeal in writing at the latest simultaneously with the lodge of the complaint to The Complaints Board for Public Procurement. The complainant shall state whether the complaint has been lodged in the stand-still period. If the appeal has not been lodged in the standstill period, the appellant must also state whether it is requested that the appeal is granted delaying effect.
VI.3.3) Service from which information about the lodging of appeals may be obtained
Konkurrence- og Forbrugerstyrelsen
Carl Jacobsens Vej 35
2500 Valby
DENMARK
E-mail: kfst@kfst.dk
Telephone: +45 417150000
VI.4) Date of dispatch of this notice:
26.6.2015